Request a Quote

{{errors.first('rs-7399-c42f-dc74', 'rs-7399-fbea-4c92')}}
{{errors.first('rs-7399-c42f-fa18', 'rs-7399-fbea-4c92')}}
{{errors.first('rs-7399-c42f-895e', 'rs-7399-fbea-4c92')}}
{{errors.first('rs-7399-c42f-d91a', 'rs-7399-fbea-4c92')}}
{{errors.first('rs-7399-c42f-3027', 'rs-7399-fbea-4c92')}}

Your enquiry has been sent, we will be in contact with you within 24 hours.

Hydramaster TMTG4000 TruckMount TO GO

TMTG4000™ Truckmount to Go™ Mobile Cleaning and Restoration Plant


The complete system includes: 

  • Wastewater recovery tank
  • High capacity automatic wastewater disposal system (for pumping wastewater to an on-location sanitary sewage access point)
  • Fuel tank
  • Vacuum and solution hoses mounted on a high capacity hose reel
  • Cleaning and extraction wand

What is a Truckmount to Go™?
The HydraMaster TMTG4000™ Truckmount to Go™ is a mobile, high performance cleaning and extraction system designed for restoration and cleaning contractors, facility managers, and disaster emergency response teams who need an easy to operate and easy to transport unit. It can be directly delivered to the job site for immediate and on-going deep cleaning and extraction of carpets, upholstery, hard surface floors, sidewalk, porch and entry way cleaning; water and flood extraction, and pressure washing where immediate collection of cleaning solutions and soiling are beneficial.
How does it work?
The complete self-contained, turn-key system can be transported via flatbed or pick-up truck, van, trailer, or even an industrial cart. As the unit provides its own power, no electricity is needed. The complete system includes: a wastewater recovery tank;  high capacity automatic wastewater disposal system (for pumping wastewater to an on-location sanitary sewage access point); fuel tank; vacuum and solution hoses mounted on a high capacity hose reel; and a cleaning and extraction wand. In addition, the TMTG uses a state-of-the-art heat exchange system to heat the cleaning solution, eliminating the need for a second fuel source required for hot water pressure washers.
Permanent Vehicle Mounting is Not Required
The TMTG™ does not require the contractor or facility to permanently tie up a vehicle. The unit is simply forklifted into the transport vehicle for delivery to the job site, or shipped by container, pod, or crate to the worksite.
Applications:

• Carpet Cleaning

• Water and flood extraction

• Upholstery Cleaning

• Stone, Tile & Concrete Floor Cleaning

• Hard Surface Floors

• Water Damage Restoration

• Pressure Washing

SPECS:

Power Plant: 23HP Briggs & Stratton Vanguard Air Cooled gasoline engine operating at 3000 RPM (Approximately 1.1 gph of fuel consumption)

Vacuum Blower: Tuthill Dominator 4005 positive displacement blower. Direct coupler driven for Vacuum to 12”Hg and up to 350+ CFMSolution 

Pump: Comet 3.5 gpm plunger pump with up to 1000 operating PSI with electric clutch control

Heating System: Thermal Capture and Heat Exchange System for cleaning solution temperatures consistently up to 240°F and maintaining above 200°F at 1.5gpm water flow depending upon conditions

Frame: Corrosion-resistant powder coated steelAutomatic 

Wastewater Disposal System: 8gpm flowrate, low amp 1/6HP gear motor, extra-large valves, sturdy powder coat base. Installed into system

 

This product has been added to your cart

CHECKOUT