Phoenix D385 Desiccant Dehumidifier

• Operates vertically or horizontally
• Wide temperature operating range
• Process air flow 320 CFM (544 m3/hr)
• Reactivation air flow 60 CFM (102 m3/hr)
• 55L water removal per day at AHAM
• Ultra low grains
• Two 7 meter power cords: Each 50Hz5.5 Amps per cord, 11 Amps / 230 Volts total
• Unlimited ducting possibilities
• Legendary stainless construction

The Phoenix D385 provides the perfect combination of features and performance for the restoration professional. Ingeniously designed to operate vertically or horizontally, the Phoenix D385 provides the wide operating range and ultra-low grains of a desiccant with the water removal capacity of the largest LGRs.

The Phoenix D385 is not like the “toy” portable desiccant dehumidifiers that lack capacity. The D385 delivers 320 CFM (544 m3/hr) of ultra-low grain process air. The true four hole configuration allows the Phoenix D385 to be located in the affected area with the 60 CFM (102 m3/hr) re-activation air stream isolated from the drying chamber. The D385’s four hole design allows the restoration contractor to set up for effective positive, neutral or negative pressure operation.

Designed to operate vertically or horizontally, the D385 will fit inside most crawlspaces. Having the D385 securely inside, rather than outside the crawlspace access.

The Phoenix D385 is easy to transport and set-up and fits in areas already designed for your LGRs and will move on to the jobsite with the same portability. All the power to the unit is provided by two 230 volt grounded power cords. Simply plug the cords into separate 10 amp outlets. Each cord draws only 5.5 amps to power the D385. The re-activation air stream is ducted through 15.25cm (6") flex duct provided with the unit and stores conveniently in the top of the unit.

Process Air Fiter Replacement4021475 16” x 20” x 2” MERV 11 Filter (Standard)
Reactivation Air Filter Replacement4026315 12” x 12” x 1” MERV 7 Filter