Bridgepoint Systems Fabric Prespray - 1 Gallon

This pre-spray uses high-grade solvents, which eliminates the need for high alkalinity, reducing the danger of browning or bleeding. It's effective on a wide variety of soils and stains on any wet cleanable upholstery carpet or rug where a low pH is desirable.

• A unique combination of detergents, solvents, and builders, formulated to emul-
sify the toughest soils and oils found in upholstery.
• Best used for pre-conditioning of fabrics and carpets prior to overall
wet cleaning.

Dilution Ratios: 16-32 oz./gal. RTU pH: 8 Contains: 1 gallon

DIRECTIONS
INSTRUCTIONS FOR UPHOLSTERY
For normal cleaning: Dilute 16 ounces of Fabric Pre-spray to one gallon of hot water (1 to 8).
For heavy cleaning: Dilute 21 ounces of Fabric Pre-spray to one gallon of hot water (1 to 6).
Apply evenly to soiled areas of upholstery. Agitate with a horsehair brush. Allow to stand 5 minutes, then rinse/extract. Mist upholstery or rugs lightly with a dilute solution of Fab-Set neutraliser (8 ounces per gallon of water - 1:16).

INSTRUCTIONS FOR CARPET

For normal cleaning: Dilute 8 ounces of Fabric Pre-spray to one gallon of hot water (1 to 16).
For heavy cleaning: Dilute 16 ounces of Fabric Pre-spray to one gallon of hot water (1 to 8).
Apply evenly to soiled areas of the carpet. Agitate with a groomer or brush and allow to stand 5 - 10 minutes, then rinse/extract. Mist upholstery or rugs lightly with Fab-Set diluted at 8 ounces per gallon (1 to 16).

BONNET CLEANING:

Dilute 16 ounces of Fabric Pre-spray to one gallon of hot water (1 to 8) and spray evenly over the carpet. Bonnet clean as normal. Effective on all types of soiling.
 

*Note - Prior to application test carpet or fabric in an
inconspicuous place for dye stability